Notifier LCD2-80 Manuel d'utilisateur télécharger pdf

DN-60548:B2 • 05/25/12 — Page 1 of 2

LCD2-80

Liquid Crystal Display

Terminal Mode Annunciator

Annunciators

DN-60548:B2

JCILCD2-80.jpg

General

The LCD2-80 is a backlit LCD annunciator for the NOTIFIER

fire alarm control panels, or network control annunciators that

support the 80-character display format. LCD2-80s may be

connected onto the four-wire EIA-485 terminal port.

The LCD2-80 mimics the display of NFS2-640, NFS2-3030,

NFS-320, NCA-2 and legacy panels that supported the LCD-

80/LCD-80TM. The NFS2-3030 and the NCA-2 also support

LCD2-80s when set for LCD-80 supervision. Up to 32 LCD2-

80s can annunciate and provide remote reset, acknowledge,

drill and silence of the control panel from remote locations.

NOTE: The LCD2-80 can be used with legacy panels that sup-

ported the LCD-80 terminal mode operation. Please refer to the

LCD2-80 manual for more information.

Features

• 80-character backlit Liquid Crystal Display (20 characters x

4 lines).

• Display mimics panel or NCA

– Event message.

– 20 characters for point label.

– 12 characters for extended label.

– Time, date and point address.

• Control switches for System Acknowledge, Signal Silence

Drill and System Reset.

• Up to 6000 foot segments between units.

• Local piezo sounder with alarm/trouble resound.

• Displays all analog, addressable points.

• Displays device type identifiers.

• Displays device and zone custom alpha labels.

• LCD2-80 mounts with any CHS-4 chassis slot.

• Slide-in label can be customized.

• LEDS for general off-normal events with UL 864 9th Edition

Panels.

NOTE: The LEDs are only applicable when used with UL 864

Ninth Edition listed panels: NFS-320, NFS2-640, NFS2-3030 and

NCA-2.

• Flush/surface/panel mount option.

• No programming necessary. LCD2-80 displays time, date,

and custom messages received from the compatible panel

or network annunciator.

• LCD2-80 is 8.25" (20.96 cm) high, 4.375" (11.11 cm) wide,

and 1.75" (4.45 cm) deep.

• Up to 32 LCD2-80s may be used on one EIA-485 circuit.

NOTE: Must have sufficient regulated 24 volt power.

NFS-320, NFS2-640, NFS2-3030, or NCA-2 connecting to LCD2-80

6,000 ft (1828.8 m)

Maximum wire length between each LCD2-80

EIA-485

(2 wires)

24 VDC

(2 wires)

EIA-485 return (2 wires)

1 2

Résumé du contenu

Page 1 - Terminal Mode Annunciator

DN-60548:B2 • 05/25/12 — Page 1 of 2LCD2-80Liquid Crystal Display Terminal Mode AnnunciatorAnnunciatorsDN-60548:B2JCILCD2-80.jpgGeneralThe LCD2-80 is

Page 2 - Agency Listings and Approvals

Commentaires sur ces manuels

Pas de commentaire

Notifier LCD2-80 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Sécurité Notifier LCD2-80. Notifier LCD2-80 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Sécurité Notifier LCD2-80